TECO Westinghouse 0.25kW 3ph 2 Pole High Efficiency Flange Mounting (B5) D63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 0.25kW (0.33HP) x 2785RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 279RPM to 4178RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 1.13A at 230V, or 0.65A at 400V.
Power Factor is 0.79 when mains connected at 50Hz.
Efficiency is 69.9%
120mm Wide x 221mm Long x 171mm high overall in its IP55 enclosure.
Foot mount on 10mm holes at 100mm wide x 80mm centres 40mm back from the shaft shoulder.
Shaft is 11mm dia x 23mm with 4mm wide key.
Weight is 6kg.
Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0063M2-10002-IZ (I2-0.25-2B5)
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.57Nm - 0.25kW (0.33HP) x 4178RPM at 75Hz
0.86Nm - 0.25kW (0.33HP) x 2785RPM at 50Hz
0.86Nm - 0.13kW (0.17HP) x 1393RPM at 25Hz
0.43Nm - 0.025kW (0.019) x 279RPM at 5Hz
Continuous Output when Inverter powered is...
0.57Nm - 0.25kW (0.33HP) x 4178RPM at 75Hz
0.86Nm - 0.25kW (0.33HP) x 2785RPM at 50Hz
0.73Nm - 0.11kW (0.14HP) x 1393RPM at 25Hz
0.43Nm - 0.013kW (0.019HP) x 279RPM at 5Hz
Download the full Manual and Dimensions from the link below:-