Teco E510 Series AC Inverter for 0.4kW (0.5HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 3.1A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
** Please note that this product has been superceded with the E510s (see linked products below). The manufacturer recommends that all users should migrate to the E510s before the E510 is made obsolete**
Dimensions: Size 1 90.6mm Wide x 146.8mm Deep x 163.6mm High (excluding earth clamp).
Enclosure rating: IP20.
Weight: 1.65kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking (DBr): To 200 Ohm minimum external resistor (not supplied). See the Resistor options linked below, or use the 'Which Resistor' button on this page.
Features: 2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 8.5A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz
EMC Filters (EMC): IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Mounting: Cubicle mount via 4 x holes at rear for M4 screws on 81mm x 153mm centres.
Ambient: Rated 50°C.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Manufacturer part number: E510-2P5-H1F.
Download the Teco E510 Manual and Quick Start Guide from the links below:-