Teco - IE2 5.5kW (7.5HP) 4 Pole AC Induction Motor 400V B3 Foot Mount - 132 Frame

TECO Westinghouse 5.5kW 3ph 4 Pole High Efficiency Foot Mounting (B3) D132S Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 5.5kW (7.5HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 145RPM to 2175RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 10.8A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 87.7%

258mm Wide x 462mm Long x 317mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 140mm centres 89mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 55kg.

Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0132S0-10004-IO (I2----5-4B3)

For Variable Speed use:-
Part Time Output when Inverter powered is...
18.1Nm - 5.5kW (7.5HP) x 2900RPM at 100Hz
36.2Nm -  5.5kW (7.5HP) x 1450RPM at 50Hz
36.22Nm - 2.8kW (3.69HP) x 725RPM at 25Hz
18.1Nm - 0.55kW (0.41) x 145RPM at 5Hz
Continuous Output when Inverter powered is...
24.1Nm - 5.5kW (7.5HP) x 2175RPM at 75Hz
36.2Nm - 5.5kW (7.5HP) x 1450RPM at 50Hz
30.8Nm - 2.34kW (3.1HP) x 725RPM at 25Hz
18.1Nm - 0.28kW (0.41HP) x 145RPM at 5Hz

Download the full Manual and Dimensions from the link below:-