TECO Westinghouse 7.5kW 3ph 4 Pole High Efficiency Foot Mounting (B3) D132M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 7.5kW (10HP) x 1455RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 146RPM to 2183RPM for 5Hz to 75Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 14.5A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 88.7%
258mm Wide x 500mm Long x 317mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 59kg.
Multi-mount design: The feet (if fitted) can be moved to allow the terminal box to be positioned at the top or on either side. The terminal box can also be repositioned to the rear of the motor if required. Vertical motor mounting is also possible with the shaft facing down.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection is included.
Part number is - ALAA-0132M0-10004-IO (I2----7-4B3)
For Variable Speed use:-
Part Time Output when Inverter powered is...
24.6Nm - 7.5kW (10HP) x 2910RPM at 100Hz
49.2Nm - 7.5kW (10HP) x 1455RPM at 50Hz
49.23Nm - 3.8kW (5.03HP) x 728RPM at 25Hz
24.6Nm - 0.75kW (0.56) x 146RPM at 5Hz
Continuous Output when Inverter powered is...
32.8Nm - 7.5kW (10HP) x 2183RPM at 75Hz
49.2Nm - 7.5kW (10HP) x 1455RPM at 50Hz
41.8Nm - 3.19kW (4.3HP) x 728RPM at 25Hz
24.6Nm - 0.38kW (0.56HP) x 146RPM at 5Hz
Download the full Manual and Dimensions from the link below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.