TEC IE2 37kW Cast Iron Three Phase Motor 400V 225S Frame B3 Force Vent

TECC2-225S-4-B3-FV

Order Code: 24949
Photo of TEC IE2 37kW Cast Iron Three Phase Motor 400V 225S Frame B3 Force Vent
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: IE2 ECOL Cast Iron

TEC Electric Motors Cast Iron 225 Frame with forced ventilation 37kW 4 Pole High Efficiency AC Induction Motor for 400V 3 phase supply. Suitable for use with a Variable Frequency Drive or fixed-frequency mains supply at 50/60Hz.

Can be used over a 14:1 (5-70Hz) Speed Control range from 147RPM to 2058RPM, fitted with separate force ventilation fan
Power Output: 37.0kW (50HP) at 50Hz
Speed: 1470RPM at 50Hz
Full Load Current: 72.02 at 400V
Power Factor: 0.80 (when mains connected at 50Hz)
Efficiency: 92.7
Rated: 40°C Ambient.

Thermistor over temperature protection: Yes
Size: 436mm Wide x 768mm Long x 553 High
Shaft: Shaft is 60mm Diameter x 140mm Length with 18mm Key.
Mounting: Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from the shaft shoulder.

Weight is 200kg.

Set terminal box links 'three-a-breast' for 400V 'Delta' connection.
Set terminal box links 'two at one side' for 690V 'Star' connection.
Ventilation space required at rear cooling air intake.

Full part number is - TECC2-225S-4-B3-FV

For Variable Speed use…
Part Time Output when Inverter powered is...
171Nm - 37kW (50HP) x 2058RPM at 70Hz
240Nm - 37kW (50HP) x 1470RPM at 50Hz
 

Continuous Output when Inverter powered is...
171Nm - 37kW (50HP) x 2058RPM at 70Hz
240Nm - 37kW (50HP) x 1470RPM at 50Hz
 

 

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.