TEC Electric 7.5kW 3ph 4 Pole Premium Efficiency (IE3) B34 Foot and Face 132 Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having a 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
** 7.5kW motors at this rating are normally 400V (DELTA) and 690V (STAR) - see item listed below**
** This motor is suitable for a 3 phase 230V supply which can be generated by a single phase AC Inverter - see item listed below**
Rating: 7.5kW at 1460RPM, 230V or 400V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 146RPM to 2044RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 24.69A at 230V (DELTA)
Full Load Current: 14.26A at 400V (Star)
Power Factor: 0.84 when mains connected at 50Hz.
Efficiency: 90.4% at full load.
Full Load Torque: 49Nm
261mm Wide x 498mm Long x 318mm High (Including terminal box)
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder: Face mount on 4 x M10 tapped holes at 165mm PCD with 130mm diameter register in the 200mm diameter flange
Shaft: 38mm diameter, 80mm long with 10mm key
IP55
Weight: 57.4kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 7.543TECAB34-230V-IE3. Frame Reference: T3A 132M4B-230V-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.