Invertek Optidrive E3 IP66/ Nema 4X Outdoor Series AC Inverter for 7.5kW (10HP) 230V 3 Ph motor to 24A. Operates in VxF, Sensorless Vector. Converts fixed frequency Single Phase 230V input to variable frequency 230V 3 phase output to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Size 4: 360mm high x 240mm wide x 261mm deep.
Enclosure Rating: IP66. Suitable for indoor and outdoor use
Weight: 9.5kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-500Hz.
Braking (DBr): 22 Ohm minimum external resistor (not supplied). See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 Analogue Inputs, 3 Digital Inputs, 2 Analogue/Digital Outputs, 2 Relay Contact Sets.
DC Bus terminals for DC supply or common bus energy saving applications.
Terminals for Safe Torque Off (EN62061 SIL Level 2), RJ45 RS-485/Modbus RTU/CANopen communications socket.
Input Current: 66A.
Input Fuse or MCB Rating: 80A.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Filters: Not Fitted (Unfiltered).
Mounting: Wall mount or Cubicle mounting via 4 x slotted holes at rear for M8 screws on 00mm x 125mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Part Number: ODE-3-420300-104A.
Place of Manufacture: Made in the UK.
Download the Invertek Optidrive Manual and Advanced User Guide from the links below:-