TEC Electric - 2.2kW 3ph 4 Pole IE1 Face Mounting (B34) 90L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 2.2kW (3HP) x 1440RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 144RPM to 2880RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 8.45A at 230V, or 4.90A at 400V.
Power Factor is 0.78 when mains connected at 50Hz.
Efficiency is 81%
183mm Wide x 367mm Long x 230.5mm high overall in its IP55 enclosure.
Face mount on M8 tapped holes at 115mm PCD with 95mm diameter spigot in the 140mm diameter flange.
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 18kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 2.243TECAB14-90-IE1. Previous Part Number was- TECA2-100L1-4-B14-90
For Variable Speed Use:-
Part Time Output when Inverter powered is…
7.243Nm - 2.2kW (2.94Hp) x 2900rpm at 100Hz
9.658Nm - 2.2kW (2.94Hp) x 2175rpm at 75Hz
14.9Nm - 2.2kW (2.94Hp) x 1450rpm at 50Hz
14.9Nm - 1.1kW (1.47Hp) x 725rpm at 25Hz
14.9Nm - 0.22kW (0.29Hp) x 145rpm at 5Hz
Continuous Output when Inverter powered is…
9.658Nm - 2.2kW (2.94Hp) x 2175rpm at 75Hz
14.9Nm - 2.2kW (2.94Hp) x 1450rpm at 50Hz
12.31Nm - 0.93kW (1.25Hp) x 725rpm at 25Hz
7.243Nm - 0.11kW (0.14Hp) x 145rpm at 5Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.