TEC Electric - 1.5kW 3ph 4 Pole High Efficiency Flange Mounting (B5) 90L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 1.5kW (2HP) x 1420RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 142RPM to 2840RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 5.73A at 230V, or 3.31A at 400V.
Power Factor is 0.79 when mains connected at 50Hz.
Efficiency is 82.8%
175mm Wide x 337mm Long x 229mm high overall in its IP55 enclosure.
Flange mount on 12mm holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Machined Shaft is 19mm dia x 40mm with 6mm wide key.
Weight is 16.9kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-90L1-4-B5
For Variable Speed use:-
Part Time Output when Inverter powered is...
5.04Nm - 1.5kW ( 2.01HP) x 2840 RPM at 100 Hz
10.09Nm - 1.5kW ( 2.01HP) x 1420 RPM at 50 Hz
10.09Nm -0.75kW ( 1.01HP) x 710 RPM at 25 Hz
10.09Nm - 0.15kW (0.20HP) x 142 RPM at 5 Hz
Continuous Output when Inverter powered is...
7.2Nm -1.5kW ( 2HP) x 1988 RPM at 70 Hz
10.09Nm -1.5kW ( 2.01HP) x 1420 RPM at 50 Hz
8.58Nm - 0.64kW ( 0.85HP) x 710 RPM at 25 Hz
5.05Nm - 0.08kW (0.10HP) x 142 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.