TEC Electric - 30kW 4 Pole Force Cooled Foot Mounting (B3) 200 Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive.
Nominal output: 30kW (40HP) x 1470RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 147RPM to 2940RPM for 5Hz to 100Hz control, without de-rating (70Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current - 55.2A at 400V.
390mm Wide x xxxmm Long x 460mm high overall in its IP55 enclosure.
Foot mount on 19mm holes at 318mm wide x 305mm centres 133mm back from shaft shoulder.
Shaft is 55mm dia x 110mm with 16mm wide key.
Weight is 169.2kg.
Forced Ventilation Fan: 3 Phase 230/400V/50Hz (0.23A 110W) Note: Single Phase 230/50HZ option avaiable on request
Rated at 40C Ambient.
Force Ventilation Fan requires space at rear cooling air intake.
Thermistors included for over-temperature protection.
Part number is - TECA2-200L-4-B3-FORCEVENT-200A230/400/3/50
For Variable Speed use:-
Part Time Output when Inverter powered is...
97.4 Nm - 30.00 kW ( 40.2 HP) x 2940 RPM at 100 Hz
194.9 Nm - 30.00 kW ( 40.2 HP) x 1470 RPM at 50 Hz
194.9 Nm - 15.00 kW ( 20.1 HP) x 735 RPM at 25 Hz
194.9 Nm - 3.00 kW ( 4.0 HP) x 147 RPM at 5 Hz
Continuous Output when Inverter powered is...
139.2 Nm - 30.00 kW ( 40.2 HP) x 2058 RPM at 70 Hz
194.9 Nm - 30.00 kW ( 40.2 HP) x 1470 RPM at 50 Hz
194.9 Nm - 15.00 kW ( 20.1 HP) x 735 RPM at 25 Hz
194.9 Nm - 3.00 kW ( 4.0 HP) x 147 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.