TEC Electric - 18.5kW 3ph 4 Pole High Efficiency Foot Mounting (B3) 180M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed mains supply output: 18.5kW (25HP) x 1460RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 146RPM to 2920RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 34.4A at 400V.
Power Factor is 0.85 when mains connected at 50Hz.
Efficiency is 91.4%
340mm Wide x 730mm Long x 440mm high overall in its IP55 enclosure.
Foot mount on 15mm holes at 279mm wide x 241mm centres 121mm back from the shaft shoulder.
Shaft is 48mm dia x 110mm with 14mm wide key.
Weight is 119kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - TECA2-180M-4-B3
For Variable Speed use:-
Part Time Output when Inverter powered is...
60.51Nm - 18.5kW ( 24.80HP) x 2920 RPM at 100 Hz
121.01Nm - 18.5kW ( 24.80HP) x 1460 RPM at 50 Hz
121.01Nm -9.25kW ( 12.40HP) x 730 RPM at 25 Hz
121.01Nm - 1.85kW (2.48HP) x 146 RPM at 5 Hz
Continuous Output when Inverter powered is...
60.51Nm -18.5kW ( 24.80HP) x 2920 RPM at 70 Hz
121.01Nm -18.5kW ( 24.80HP) x 1460 RPM at 50 Hz
102.86Nm - 7.86kW ( 10.54HP) x 730 RPM at 25 Hz
60.51Nm - 0.93kW (1.24HP) x 146 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.