TEC Electric - 7.5kW 3ph 4 Pole High Efficiency Foot and Flange Mounting (B35) 132M Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed mains supply output: 7.5kW (10HP) x 1450RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 145RPM to 2900RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 14.5A at 400V.
Power Factor is 0.84 when mains connected at 50Hz.
Efficiency is 88.7% (A more efficient motor is available, please see linked products below)
252mm Wide x 475mm Long x 318mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 216mm wide x 178mm centres 89mm back from the shaft shoulder.
Flange mount on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Weight is 52.6kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 7.543TECAB35-IE2. Previous Part Number was - TECA2-132M1-4-B35
For Variable Speed use:-
Part Time Output when Inverter powered is...
24.70Nm - 7.5kW ( 10.05HP) x 2900 RPM at 100 Hz
49.40Nm - 7.5kW ( 10.05HP) x 1450 RPM at 50 Hz
49.40Nm -3.75kW ( 5.03HP) x 725 RPM at 25 Hz
49.40Nm - 0.75kW (1.01HP) x 145 RPM at 5 Hz
Continuous Output when Inverter powered is...
35.3Nm -4kW ( 5.36HP) x 2030 RPM at 70 Hz
49.40Nm -7.5kW ( 10.05HP) x 1450 RPM at 50 Hz
41.99Nm - 3.19kW ( 4.27HP) x 725 RPM at 25 Hz
24.70Nm - 0.38kW (0.50HP) x 145 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.