TEC Electric 1.5kW 3ph 2 Pole Foot and Face Mounting (B34) 80L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Supply Output: 1.5kW (2HP) x 2850RPM.
Voltage: 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 285RPM to 3990RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 5.87A at 230V, or 3.32A at 400V.
Power Factor: 0.82 when mains connected at 50Hz.
Efficiency: 78.5%.
Dimensions: 163mm Wide x 290mm Long x 215mm high overall.
Enclosure Rating: IP55.
Face mount on 4 x M8 mm bolts at 110mm PCD with 80mm diameter register on a 120mm face.
Foot mount on 9mm holes at 125mm wide x 100mm centres 50mm back from shaft shoulder.
Shaft: 19mm dia x 40mm with 6mm wide key.
Weight: 11.1kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for use with external over-temperature protection decice.
Part Number: 1.523TECAB34-80-S2.
For Variable Speed Use:-
Part Time Output when Inverter powered:
3.6Nm, 1.5kW (2Hp) x 3990rpm at 70Hz.
5Nm, 1.5kW (2Hp) x 2850rpm at 50Hz.
5Nm, 0.75kW (1Hp) x 1425rpm at 25Hz.
5Nm, 0.15kW (0.2Hp) x 285rpm at 5Hz.
Continuous Output when Inverter powered is…
3.6Nm, 1.5kW (2Hp) x 3990rpm at 70Hz.
5Nm, 1.5kW (2Hp) x 2850rpm at 50Hz.
4.3Nm, 0.63kW (0.85Hp) x 1425rpm at 25Hz.
2.5Nm, 0.07kW (0.1Hp) x 285rpm at 5Hz.
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.