TEC Electric 0.18kW 3ph 6 Pole Foot Mounting 71 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with Variable Frequency Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Mains Supply Output: 0.18kW (0.25HP) x 880RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 15:1 Speed Control range from 88RPM to 1232RPM for 5Hz to 70Hz with suitable de-rating at the lower speeds (70Hz is the maximum continuous for maximum output, as advised by the Manufacturer).
Full Load Current: 1.22A at 230V, or 0.7A at 400V.
Efficiency: 56% (IE1). A more efficient motor is available, please see linked items below
Power Factor: 0.66 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
145mm Wide x 255mm Long x 188mm high overall in its IP55 enclosure.
Foot mount on 7mm holes at 112mm wide x 90mm centres 45mm back from shaft shoulder.
Shaft is 14mm dia x 30mm with 5mm wide key.
Terminal box has 1 x M20 Gland.
Weight is 5.6kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor over-temperature protection is included.
Part number is - 0.1863TECAB3 71 (TECA711-6 B3)
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.98Nm - 0.18kW (0.25HP) x 1760RPM at 100Hz
1.95Nm - 0.18kW (0.25HP) x 880RPM at 50Hz
1.95Nm - 0.09kW (0.125HP) x 440RPM at 25Hz
1.95Nm - 0.018kW (0.025HP) x 88RPM at 5Hz
Continuous Output when Inverter powered is...
1.4Nm - 0.18kW (0.25HP) x 1232RPM at 70Hz
1.95Nm - 0.18kW (0.25HP) x 880RPM at 50Hz
1.66Nm - 0.076kW (0.1HP) x 440RPM at 25Hz
0.88Nm - 0.009kW (0.012HP) x 88RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-