TEC Electric 4kW 3ph 2 Pole Premium Efficiency (IE3) B35 Foot and Flange 112 Frame AC Motor for 230V or 400V 3 phase supply.
Suitable for use with a Variable Frequency Inverter Drive having a 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz/60Hz.
** 4kW motors at this rating are normally 400V (DELTA) and 690V (STAR) - see item listed below**
** This motor is suitable for a 3 phase 230V supply which can be generated by a single phase AC Inverter - see item listed below**
Rating: 4kW at 2920RPM, 230V or 400V 3ph 50Hz.
Inverter Rated: 14:1 Speed Control range from 292RPM to 4088RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 12.47A at 230V (DELTA)
Full Load Current: 7.2A at 400V (Star)
Power Factor: 0.91 when mains connected at 50Hz.
Efficiency: 88.1% at full load.
Full Load Torque: 13Nm
250mm Wide x 397mm Long x 278mm High (Including terminal box)
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder; Flange mount on 4 x 14.5mm holes equispaced on 215mm PCD with 180mm diameter spigot in the 250mm diameter flange
Shaft: 28mm diameter, 60mm long with 8mm key
IP55
Weight: 30.1kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number: 4.023TECAB35-230-IE3. Frame Reference: T3A 112M2A-230-TECA
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.