TEC Electric Motors 160M IE2 Frame 7.5kW 6 Pole AC Induction Motor for 400V or 690V 3 phase supply with 1024ppr incremental encoder, Force Ventilation Unit.. Suitable for use with a Variable Frequency Drive or fixed-frequency mains supply at 50/60Hz.
Fixed mains supply output: 7.5kW (10.1HP) x 970RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 97RPM to 1940RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current - 16.1A at 400V.
Power Factor is 0.77 when mains connected at 50Hz.
Efficiency is 87.5%
290mm Wide x 640mm Long x 384mm high overall in its IP55 enclosure. Including FVU
Foot mount on 12mm by 15mm holes at 254mm wide x 210mm centres 108mm back from the shaft shoulder.
Shaft is 42mm dia x 110mm with 12mm wide key.
Weight is 80kg.Approx
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 7.563TECAB3-IE2-ENC-FVU (7.563TECAB3-IE2-FVU-ENC)
For Variable Speed use:-
Part Time Output when Inverter powered is...
36.92Nm - 7.5kW ( 10.05HP) x 1940 RPM at 100 Hz
73.84Nm -7.5kW ( 10HP) x 970 RPM at 50 Hz
73.84Nm -3.75kW ( 5.03HP) x 485 RPM at 25 Hz
73.84Nm - 0.75kW (1.01HP) x 97 RPM at 5 Hz
Continuous Output when Inverter powered is...
52.7Nm -7.5kW ( 10.05HP) x 1358 RPM at 75 Hz
73.84Nm - 7.5kW ( 10HP) x 970 RPM at 50 Hz
62.76Nm - 3.19kW ( 4.27HP) x 485 RPM at 25 Hz
36.92Nm - 0.38kW (0.5HP) x 97 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.