TEC Electric - 2.2kW 3ph 6 Pole High Efficiency Foot and Flange Mounting (B35) 100L1 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output. Complete with 1024ppr Encoder and Axial Force Ventilation Fan.
Fixed mains supply output: 2.2kW (3HP) x 945RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 20:1 Speed Control range from 94.5RPM to 1890RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Force vent unit Single phase 240V 50Hz 0.175A 85W 2600rpm
Full Load Current - 5.17A at 400V. and 8.96A at 240V
Power Factor is 0.75 when mains connected at 50Hz.
Efficiency is 81.8%
220mm Wide x 485mm Long x 279mm high overall in its IP55 enclosure.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder. Flange mount on 15mm holes at 215mm PCD with 180mm diameter spigot in the 250mm diameter flange.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 35kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Part number is - 2.263TECAB35-IE2-ENC/FVU
For Variable Speed use:-
Part Time Output when Inverter powered is...
11.12Nm - 2.2kW ( 2.95HP) x 1890 RPM at 100 Hz
22.23Nm -2.2kW ( 3HP) x 945 RPM at 50 Hz
22.23Nm -1.1kW ( 1.47HP) x 473 RPM at 25 Hz
22.23Nm - 0.22kW (0.29HP) x 95 RPM at 5 Hz
Continuous Output when Inverter powered is...
15.9Nm - 2.2kW ( 2.95HP) x 1323 RPM at 70 Hz
22.23Nm - 2.2kW ( 3HP) x 945 RPM at 50 Hz
18.9Nm - 0.94kW ( 1.25HP) x 473 RPM at 25 Hz
11.12Nm - 0.11kW (0.15HP) x 95 RPM at 5 Hz
Download the full Manual and Dimensions from the links below:-
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.