Sprint 3600XRi/16/LV60 16A 4Q 30V/60V 1ph AC to DC 4Q Isolated Signals

Sprint Electric 3600XRi-16-LV60 - 16A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.
60V AC supply – 16A at 48V DC.
30V AC supply – 16A at 24VDC.

Size: 200mm Wide x 70mm Deep x 175mm High. IP00
Weight: 1.75Kg

Adjustments:-
Max & Min Speed
Forward and reverse ramp times
Positive and negative I current clamps
Stability
Adjustable IR compensation for improved AVF speed regulation
Switch selectable Tacho or Armature voltage feedback
2Q/4Q select
Torque or speed control selectStall level
Selectable dual voltage ac supply
​Setpoint type select +/-10V or 4-20ma
Aux speed or torque input (selectable)
Zero speed or Stall volt free changeover contact
Run inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)

Input Current: 16A to 24A (depending on motor inductance).
Input Voltage: 30V or 60V single phase +-10% at 50/60Hz.
Field Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)
Armature Form Factor: Typical form factor 1.5 (load dependant).
Stall protection @ 150% for 30 seconds included

Wall mount in clean environment or cubicle mount.
Rated at -10° to 40°C Ambient.
Heat Loss at Max output: 50W.
Mounting via 2 x M5 by 35mm @ 165mm.

Manufacturer part number is 3600XRi/16/LV60.(Also known as 3600XRi/16/LV60-001)

Download the Sprint 3600XRi manual below:-