Sprint 3600XRi/8/LV60 8A 4Q 30V/60V 1ph AC to DC Isolated Signals

Sprint Electric 3600XRi/8/LV60 - 8A Four Quadrant (Regenerative) Isolated DC Thyristor Drive for motor speed and torque control.
60V AC supply – 8A at 48V DC.
30V AC supply – 8A at 24VDC.
(Low voltage variants are available see links below)

Size: 200mm Wide x 70mm Deep x 175mm High. IP00
Weight: 1.75Kg

Adjustments:-
Max & Min Speed
Forward and reverse ramp times
Positive and negative I current clamps
Stability
Adjustable IR compensation for improved AVF speed regulation
Switch selectable Tacho or Armature voltage feedback
2Q/4Q select
Torque or speed control selectStall level
Selectable dual voltage ac supply
​Setpoint type select +/-10V or 4-20ma
Aux speed or torque input (selectable)
Zero speed or Stall volt free changeover contact
Run inhibit Note  Field and power terminals remain live . (RUN must not be relied on during hazardous operations)

Input Current: 8A to 12A (depending on motor inductance).
Input Voltage: 30V or 60V single phase +-10% at 50/60Hz.
Field Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)
Armature Form Factor: Typical form factor 1.5 (load dependant).
Stall protection @ 150% for 30 seconds included

Wall mount in clean environment or cubicle mount.
Rated at -10° to 40°C Ambient.
Heat Loss at Max output: 25W.
Mounting via 2 x M5 by 35mm @ 165mm.

Manufacturer part number is 3600XRi/8/LV60.(Also known as 3600XRi/8/LV60-001)

Please note that this item will be supplied with isolated auxiliary terminals 51 to 70 fitted - part no suffix -001. These can be ignored if not required by the application.
Auxiliary terminal added features: Unprotected +/- 24V and 12V rails, rated at 25ma and 10ma respectively.
Auxiliary speed, no start speed setpoint and torque inputs. 
Speed demand, speed and setpoint ramp analogue outputs.
Zero speed, reverse direction and stall relay driver outputs.


Download the Sprint 3600XRi manual below:-