Siemens SINAMICS PM230 - 15kW/18.5kW 400V 3ph - AC Power Module for G120 Series Inverter Drive

Siemens SINAMICS PM230 Power Module for 15kW (20HP) 400V Three Phase Motor to 32A at High Overload or 18.5kW (25HP) to 38A when Fan/Pump rated. Converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor when used with a compatible G120 Series Modular Control Unit.

Add a compatible G120 Series Modular Control Unit and Operator Keypad (see linked products below) to complete the G120 Inverter Drive.
Size D - 320mm Wide x 329mm Deep x 640mm High (excluding Control Unit). IP55

Overload: 150% x 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. High Overload.
Overload: 110% x 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. Fan/Pump Rated.
Braking: None

Input Voltage: Three Phase 380V-480V ± 10% at 50-60Hz ± 5%
Input Current: 33A at High Overload, 39A when Fan/Pump rated.
EMC Filters: Class B (Industrial)

Rated 50°C ambient at High Overload, 40°C when Fan/Pump rated.
Ventilation space in front: 65mm
Ventilation space above: 300mm
Ventilation space below: 300mm
Ventilation space at sides: 0mm
Heat Loss at max output: 0.52kW
Mounting via 4 x 8.5mm diameter slotted holes at rear on 285mm x 600mm centres.

Manufacturer part number is 6SL3223-0DE31-8BA0

Download the Siemens SINAMICS G120 Power Module PM230 Start Guide from the link below:-