Universal Motors Goodrive GD10 series AC Inverter for 2.2kW (3) 400V 3ph motor in VxF control to 5.5A. Converts fixed frequency 400V three phase input to variable frequency 400V three phase to control the speed of a standard AC Induction motor.
The GD10 has been superseded by the GD20. See linked products below for equivalent.
Size 2: 100mm wide x 153.2mm deep x 170.5mm high; IP20
Mounting via 2 x 5mm diameter holes at rear on 89mm x 154mm centres
Weight: 1.3kg.
Overload: 150% x 60 seconds, 180% x 10 seconds, 200% x 1 second
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into minimum 54 Ohm, maximum 222 Ohm external resistor (not supplied). See linked products below for compatible resistor.
Removable Keypad with potentiometer, 1 Analogue Input, 4 Digital Inputs, 1 Digital Input/Output, 1 Analogue Output, 1 Relay Contact, Terminals for Modbus RS485 Communications.
STO: Not available on this model.
Input Current: 7.1A
Input Voltage: 380V-440V Three Phase -15% +10% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters, optional external filters available.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 100mm.
Heat Loss at max output: [not specified]
Universal Motors part number is VAR-GD102R2G4B.
Download the Universal Motors GD10 Manual from the link below:-