Universal GD20 series AC Inverter for 2.2kW 400V 3ph motor to 5.5A. Operates in standard V/F or Sensorless Vector Control and Converts fixed frequency 400V three phase input to variable frequency 400V three phase to control the speed of a standard AC Induction motor.
**Available from stock only - see replacement product below**
Size 1: 80mm wide x 141mm deep x 185mm high; IP20
Mounting via 4 x 5mm diameter holes at rear on 175mm x 60mm centres
Weight: 1.5kg.
Overload: 150% x 60 seconds, 180% x 10 seconds, 200% x 1 second
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into minimum 130 Ohm, maximum 222Ohm external resistor (not supplied). See linked products below for compatible resistor.
Fixed Keypad with Potentiometer
2 Analogue Inputs, 4 Digital Inputs, 1 Digital Output, 1 Analogue Output, 1 Relay Contact, 1 x Pulse Input (50kHz Max Input).
Comms: Terminals for Modbus RS485 Communications.
STO Included: Class SIL2 PLd Cat3
Input Current: 5.8A
Input Voltage: 400V-440V Three Phase -15% +10% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters, optional external filters available.
Cubicle Mount
Ambient operating temperature to 40°C without de-rating.
Ventilation space in front: [not specified], above and below: 100mm, at sides: Not Specified
Heat Loss at max output: [not specified]
Manufacturers Part number: VAR-GD202R2G4B.
Alternative Part Number: GD20-2R2G-4