Teco A510 Series AC Inverter for 22kW (30HP) 400V 3 Ph motor to 45A at high overload, or 30kW (40HP) to 58A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Dimensions: Size 4 265mm Wide x 225mm Deep x 480mm High.
Weight: 11.6kg.
Overload: 150% x 60 seconds, 200% x 2 seconds at high overload rating.
Overload: 120% x 60 seconds when Fan/Pump rated.
Speed Control Range: 0-1200Hz (depending on control mode).
Braking: to Minimum 27.2 Ohm minimum external resistor (not supplied), see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 Analogue Inputs, 8 Digital Inputs, 1 Pulse Input, 2 Analogue Outputs, 2 Digital Outputs, 2 Relay Contact sets, 1 Pulse Output, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 48.9A at high overload, or 63A when fan/pump rated.
Input Voltage: 380V-480V Three Phase +10% -15% at 50-60Hz ±5%.
EMC Filters: IEC EN61800-3 (Industrial).
Mounting: Wall mount in clean environment or cubicle mount via 4 x holes at rear for M6 screws on 245mm x 340mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [not specified], Ventilation space above and below: 150mm, Ventilation space at sides: 200mm.
Heat Loss [not specified].
Part Number: A510-4030-H3F.
Download the Teco A510 Manual and Quick Start Guide from the links below:-