Siemens SINAMICS G120C Series AC Inverter for an 11kW (15HP) 400V Three Phase Motor to 25A at High Overload, or 15kW (20HP) to 31A when Fan/Pump rated. Operates in VxF or Sensorless Vector Control and converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor.
Does not include operator keypad, see linked products below for compatible options.
Frame Size C, 140mm Wide x 226mm Deep x 295mm High (BOP-2 Keypad adds 6mm to depth, IOP adds 21mm).
Enclosure Rating: IP20.
Weight: 4.7kg.
11kW, 25A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Overload)
15kW, 31A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Overload)
Braking (DBr): to 30 Ohm minimum external resistor (not supplied). See the Resistor options below. Fit resistor for Dynamic Braking if required.
Features: 1 Analogue Input, 1 Analogue Output, 6 Digital Inputs, 1 Digital Output, 1 Relay Contact set, Motor Temperature Terminals, USB Interface (Mini-B type) for PC, Slot for memory card (MMC or SD).
Fieldbus: ProfiNET, EtherNET IP
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Inputs. 2 Digital Inputs can be reassigned for this purpose if required.
Output Frequency: 0-240Hz (Sensorless Vector) or 0-550Hz (V/F)
Input Voltage: Three Phase 380V to 480V +10% -20% at 50-60Hz ± 5%.
Input Current: 36.4A at High Overload, 40.6A when Fan/Pump rated.
EMC Filters: Internal, to IEC 61800-3 Class A Category C2 (Industrial).
Mounting: Cubicle mount via 4 x M5 bolts (not supplied) at rear on 283mm x 118mm centres.
Ambient Temperature: Rated 40°C.
Ventilation space in front: [not specified], Ventilation space above: 80mm, Ventilation space below: 100mm, Ventilation space at sides: 0mm.
Heat Loss: 435W at maximum output.
Manufacturer part number: 6SL3210-1KE23-2AF1 (6SL32101KE232AF1).
Download the Siemens SINAMICS G120C Manual and Getting Started Guide from the links below:-