Nord SK515E Nordac Pro series AC Inverter for 75kW (100HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 150A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
⛔ SK 500E has been replaced by the SK 500P - see linked products below. The SK500 E is being phased out before becoming obsolete by 2028. It is still available but it built to order and is no longer considered a current product. ⛔
Size 9: 265mm Wide x 286mm Deep x 636mm High (excluding mounting brackets). IP20
Weight: 25kg.
Overload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking: Minimum 6 Ohm external resistor (not supplied) - see the Linked Products below or use the 'Which Resistor' button on this page.
No operator keypad included – see linked products below for options.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, 1 x RJ12 port for RS232/RS485 (USS or Modbus RTU) communications, 2 x RJ45 ports for CANopen communications. Terminals for STO (Safe Torque Off) to SIL 3 (EN 61508). Terminals for optional external 24V control supply. Terminals for motor PTC sensor.
Input Current: 210A
Input Voltage: 380-480V Three Phase -20% +10% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Class A Category C2 (Industrial) up to cable length of 20 metres shielded.
Nord recommend DCL choke to be fitted with this item - please see linked items below.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space above and below: 100mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 1654W (approx.)
Mounting via 4 x 8mm holes on 210mm x 620mm centres.
Manufacturer part number is SK515E-752-340-A Sometimes specified as 275727500. (SK515E-752-340-A) Part of the SK500E family.
Replacement for SK700E-752-340-O if fitted with either Basic I/O module (SK CU1-BSC) or Standard I/O Module (SK SU1-STD). For details of differences please see link below.
Download the Nord SK 515E Manual from the link below:-