Nord SK500E Series AC Inverter for 110kW (150HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 220A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Operator keypad not included - see linked products below.
Size 10: 395mm Wide x 292mm Deep x 720mm High. IP20
Weight: 46kg.
Overload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking: Minimum 3.2 ohms external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, RJ12 port for RS232 Diagnostic Interface.
RJ12 Port for RS485 Communication, Safe Stop (STO/SS1), CANopen In/Out RJ45 on board, PTC Input.
Input Current: 308A
Input Voltage: 380-480V Three Phase +10% -20% at 47-63Hz.
EMC Filters: IEC EN61800-3 Category C2 (Industrial) up to cable length of 20 metres shielded.
Nord recommend DCL choke to be fitted with this item - please see linked items below.
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 2530W (approx.)
Mounting via 4 x 8mm slotted holes on supplied brackets at rear on 704mm x 360mm centres.
Manufacturer part number is SK 515E-113-340-A . Sometimes known as 275721130. (SK515E-113-340-A)
Replacement for SK700E-113-340-O if fitted with either Basic I/O module (SK CU1-BSC) or Standard I/O Module (SK SU1-STD). For details of differences please see link below.
Download the Nord SK 500E Manual from the link below:-