Nord SK500E Nordac Pro series AC Inverter for 0.75kW (1HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 2.1A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
**Available from stock only**
Size 1: 74mm Wide x 153mm Deep x 186mm High (excluding mounting brackets). IP20
Weight: 1.4kg.
Overload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking: Minimum 300 Ohm external resistor (not supplied) - see the Linked Products below or use the 'Which Resistor' button on this page.
No operator keypad included – see linked products below for options.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, 1 x RJ12 port for RS232/RS485 (USS or Modbus RTU) communications.
Input Current: 3.2A
Input Voltage: 380-480V Three Phase +10% -20% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Class B Category C1 (Industrial and Domestic). Leakage can be reduced or filters disabled via jumpers if required.
Cubicle mount.
Rated 40°C Ambient.
Ventilation space above and below: 100mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 44W (approx.)
Mounting via 2 x 5.5mm slotted holes on supplied brackets at rear on 220mm centres. Optional DIN rail mount kit (not supplied).
Manufacturer part number is SK 500E-750-340-A. Sometimes specified as 275420075. (SK500E-750-340-A)
Replacment for SK 750/3 FCT, 278007550. For details of differences plesae see link below.
Download the Nord SK 500E Manual from the link below:-