Mitsubishi E840 IP20 3.7kW/5.5kW 400V 3ph AC Inverter, DBr, STO, Unfiltered

FR-E840-0095-4-60 (500114)

Order Code: 35602
Available to Order
Delivery 3-5 working days

List Price: £674.00

£640.30
(excl. VAT)
£768.36
(inc. VAT )
Price break
per unit
1+
£640.30

Condition: New with Warranty
Brand: Mitsubishi, Range: FR-E800

Mitsubishi Automation E840 Series AC Frequency Inverter for 3.7kW 400V 3 Ph motor to 8.7A at High Overload (ND) or 5.5KW to 9.4A when Fan/Pump (LD) rated. Operates in VxF or Sensorless Vector control and converts three phase 400V input to three phase 400V to control the speed of a standard AC Induction Motor or Permanent Magnet Synchronous Motor.

Overload Rating (Normal Duty – ND – Default Setting)
Output: 8.7A, 3.7kW at 400V
Overload: 150% for 60 Seconds, 200% for 3 seconds

Overload Rating (Light Duty – LD)
Output: 9.4A, 5.5kW at 400V
Overload: 120% for 60 seconds, 150% for 3 seconds

Size 4: 140mm Wide x 135mm Deep x 150mm High
Protection: IP20
1.8kG

Speed Control Range: 0.2 to 400Hz.
Braking (DBr): Fitted with Internal Braking Switch. Fit external Braking Resistor if this feature is required. Braking resistor is not supplied see linked products below. Minimum resistor 130 ohms.

Fixed Keypad with Front Mounted Potentiometer.
2 x Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 1 Relay Contact set and 2 Digital Outputs.
Fieldbus: RS485, MODBUS RTU Protocol via PU Connector. For connection details see the communications manual below.
Programmable from the Keypad, PC via FR-Configurator software, or from the 10 key hand-held parameter unit (see Linked Products below).

Safety Features: Safe Torque Off (STO) up to SIL2/PLd. Links need to be removed and replaced with suitable safety circuit to activate. Dual Channel Input and Monitor Output.
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module.

Input Current (ND): 14.1A Can be improved to 9.5A if an additional DC Choke is fitted (see linked products below)
Input Current (LD): 16.2A can be improved to 11A if an additional DC Choke is fitted (see linked products below)
Input Voltage: 380-480V three phase -15%, +10% at 50/60Hz +/- 5%.

Cubicle Mount
Ambient Temperature 50°C 
Mount via 4 x 5mm holes on 138mm x 128mm centres
Ventilation Space: 100mm above, 100mm below, 10mm at sides and 10mm in front.
Heat Loss at max output: 112W (ND), 136W (LD)
Full part number is: FR-E840-0095-4-60. Replaces: FR-E740-095SC-EC. Alternative Part Number: FR-E840-3.7K-4-60 

You may also be interested in...

Photo of Dynamic Brake Resistor, 150 Ohms, 1000 Watts

Dynamic Brake Resistor, 150 Ohms, 1000 Watts

RE/ 60x370 SI/PR/TP/KL 1000W 150R 5%

Order code: 24798

Delivery 3 weeks

£151.00
1+
Photo of Mitsubishi EMC Filter, 400V 3ph, 16A for FR-700 and FR-800 Series AC Inverters

Mitsubishi EMC Filter, 400V 3ph, 16A for FR-700 and FR-800 Series AC Inverters

FFR-MSH-095-16A-SF1

Order code: 35597

Delivery 3 weeks

£56.50
1+
Photo of Mitsubishi DC Link Choke for 3.7kW Inverter 400V

Mitsubishi DC Link Choke for 3.7kW Inverter 400V

FFR-HEL-H3-7K-E

Order code: 26409

Delivery 10 weeks

£68.50
1+
Photo of Mitsubishi Parameter Unit and Clone module for 700 & 800 Series Inverters

Mitsubishi Parameter Unit and Clone module for 700 & 800 Series Inverters

FR-PU07

Order code: 19982

1 in stock

2+ normally 3 weeks

£164.50
1+
Photo of FR-Configurator2 for 800 Series + FR-Configurator for 700 Series Multi l

FR-Configurator2 for 800 Series + FR-Configurator for 700 Series Multi l

FR Configurator-M + FR-Configurator2

(275503)

Order code: 28972

4 in stock

5+ normally 6 weeks

£50.00
1+
Photo of Mitsubishi DC Link Choke for 5.5kW Inverter 400V

Mitsubishi DC Link Choke for 5.5kW Inverter 400V

FFR-HEL-H5.5K-E

Order code: 28106

Delivery 12 weeks

£74.50
1+