Yaskawa GA500 Series AC Inverter for 2.2kW (3HP) 230V 3ph motor to 11A at high overload or 3kW (3HP) to 12.2A when Fan/Pump rated. Operates in VxF or Sensorless Vector and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V to control a standard AC induction, permanent magnet or synchronous reluctance motor.
Size 3d: 140mm Wide x 203mm Deep x 128mm High. IP20.
Weight: 2.7kg.
2.2kW; 11A with 150% overload for 60 seconds. - Heavy Duty (HD). (Once every 10 minutes) - Default Setting
3kW; 12.2A with 110% overload for 60 seconds. Normal Duty (ND). (Once every 10 minutes) - Change paramenter C6-01 to 1 for ND Rating
Speed Control Range: 0-590Hz.
Braking (DBr): Built-in braking transistor for 100% Torque for 10 seconds every 100 seconds (10% duty cycle). A 60 Ohm minimum external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required.
Includes removable Operator Keypad, 2 Analogue Inputs, 7 Digital Inputs, 1 Pulse Input, 1 Analogue Outputs, 1 Pulse Output, 2 Digital Outputs, 1 Relay Output, USB mini-B port for PC connection.
Serial Communications: Terminals for MEMOBUS/Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL3 (EN61800-5-2)
24V DC input to power the control unit when the main supply is disconnected. (24V, 700mA nominal)
Input Current: 20.6A at High Overload, 24A when Fan/Pump rated.
Input Voltage: 200-240V Sinlge Phase -15% +10% at 50-60Hz ±5%.
EMC Compliance: IEC EN 61800-3 Category C1 (Domestic). Disabled by default, can be enabled via screw.
Cubicle mount.
Rated at 40°C ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 30mm.
Heat Loss at High Overload: 93W total at max output, split 45W from the Electronics and 48 from the heatsink, when through panel mounted (see options linked below).
Heat Loss at Fan/Pump Rating: 116W total at max output, split 56W from the Electronics and 60W from the heatsink, when through panel mounted (see options linked below).
Mounting via 4 x M5 bolts (not supplied) at rear on 118mm x 128mm centres.
Manufacturer part number is CIPR-GA50CB012EBAA (10103584)
Replaces: CIMR-VCBA0012BAA (VZAB-2P2-BAA)