Yaskawa GA500 Series AC Inverter for 0.25kW (0.25HP) 230V 3ph motor to 1.6A at high overload or 0.37kW (0.25HP) to 1.9A when Fan/Pump rated. Operates in VxF or Sensorless Vector and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V to control a standard AC induction, permanent magnet or synchronous reluctance motor.
Size 1c: 68mm Wide x 116mm Deep x 128mm High. IP20.
Weight: 0.7kg.
0.25kW; 1.6A with 150% overload for 60 seconds. - Heavy Duty (HD). (Once every 10 minutes) - Default Setting
0.37kW; 1.9A with 110% overload for 60 seconds. Normal Duty (ND). (Once every 10 minutes) - Change paramenter C6-01 to 1 for ND Rating
Speed Control Range: 0-590Hz.
Braking (DBr): Built-in braking transistor for 100% Torque for 10 seconds every 100 seconds (10% duty cycle). A 300 Ohm minimum external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required.
Includes removable Operator Keypad, 2 Analogue Inputs, 7 Digital Inputs, 1 Pulse Input, 1 Analogue Outputs, 1 Pulse Output, 2 Digital Outputs, 1 Relay Output, USB mini-B port for PC connection.
Serial Communications: Terminals for MEMOBUS/Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL3 (EN61800-5-2)
24V DC input to power the control unit when the main supply is disconnected. (24V, 700mA nominal)
Input Current: 2.8A at High Overload, 5A when Fan/Pump rated.
Input Voltage: 200-240V Single Phase -15% +10% at 50-60Hz ±5%.
EMC Compliance: IEC EN 61800-3 Category C1 (Domestic). Disabled by default, can be enabled via screw.
Cubicle mount.
Rated at 40°C ambient.
Ventilation Space: In front: [not specified], above: 100mm, below: 100mm, at sides: 30mm.
Heat Loss at High Overload: 19W total at max output, split 12W from the Electronics and 7W from the heatsink, when through panel mounted (see options linked below).
Heat Loss at Fan/Pump Rating: 29W total at max output, split 18W from the Electronics and 11W from the heatsink, when through panel mounted (see options linked below).
Mounting via 4 x M5 bolts (not supplied) at rear on 118mm x 56mm centres.
Manufacturer part number is CIPR-GA50CB002EBAA
Replaces: CIMR-VCBA0002BAA (VZAB-0P2-BAA)