Yaskawa J1000 Series AC Inverter for 2.2kW (3HP) 230V 3ph motor to 12A at high overload or 3kW (4HP) to 12A when Fan/Pump rated. Operates in VxF control and converts fixed frequency Three Phase 230V input to variable frequency Three Phase 230V for a standard AC Induction motor.
Size: 128mm Wide x 143mm Deep x 128mm High. IP20
Weight: 1.7kg.
Overload: 150% x 60 seconds. High Overload.
Overload: 120% x 60 seconds. Fan/Pump Rated.
Speed Control Range: 0.01-400Hz.
Braking - 100% Torque x 12 seconds every 120 seconds to 70 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
1 x Analogue Input, 1 x Analogue Output, 5 Digital Inputs, 1 Relay Output.
Input Current: 11A at High Overload, 13.9A when Fan/Pump rated.
Input Voltage: 200-240V Three Phase -15% +10% at 50-60Hz ±5%
EMC Filters: None (see linked products below for external filter)
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], Ventilation space above and below: 100mm, Ventilation space at sides: 30mm (2mm when drives mounted side by side).
Heat Loss at max output: 100.6W.
Mounting via M4 bolts (not supplied) at rear on 96mm x 118mm centres.
Manufacturer part number is CIMR-JC2A0012BAA.
Download the Yaskawa J1000 Manual and Quick Start Guide from the links below:-