WEG CFW100 Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 4.2A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC induction motor.
G2 (generation 2) has the same dimensions and electrical connections as the first generation (see linked products below) and is fully compatible with existing accessories. Generation 2 adds additional plug-in modules, software, communication and energy-saving features as well as compatibility with WEG's new WPS PC software package. It is identifiable by the grey panel around the keypad.
Dimensions: Size C 55mm Wide x 129mm Deep x 125.6mm High.
Encosure Rating: IP20.
Weight: 0.61kg.
Overload: 150% x 60 seconds every 10 minutes.
Speed Control Range: 0-400Hz
Braking: None
Features: Fixed Operator Keypad. Standard IO consists of 4 Digital Inputs for Run and Speed control via switches for its internal Electronic Potentiometer or Pre-Set Speeds. Expansion modules are available, see linked products below. Only one module can be fitted to the CFW100.
Programmable via PC using free WPS software (Software conversion required for Genration 1 Programs) USB Communication module required - see linked products below
Input Current: 9.2A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz (48-62Hz)
Maximum of 10 connections per hour (1 every 6 minutes).
EMC Compliance: No integrated EMC filters.
Mounting: Cubicle mount via 35mm DIN rail or optional surface mount brackets with 4 x M4 screws on 41.3mm x 113.4mm centres (not included - see linked products below).
Ambient: Rated 50°C.
Ventilation space in front: 50mm, above: 50mm, below: 50mm, at sides: 0mm.
Heat Loss: 40W at max output.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Manufacturers part number: CFW100C04P2S220G2 or 14248218
Download the WEG CFW100 Manual, Programming Guide and SoftPLC reference from the links below:-