WEG Automation CFW-10 AC Frequency Inverter for 1.5kW (2HP) 230V 3 Ph motor in VxF control to 7.3A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Space-saving "Cold Plate" design. Drive should be mounted on a heat dissipating surface such as a suitable enclosure back plate.
Size 2 - 120mm Wide x 82mm Deep x 161mm high. IP20.
Overload - 150% x 60 seconds.
Speed Control Range - 0-300Hz.
Braking - To 39 Ohm minimum external resistor (not supplied) Terminal covers must be carefully cut out to reveal the screw terminals BR and + UD - see the resistor Options linked below or use the 'Which Resistor' button on this page.
Features - 1 x Analogue Input, 4 Digital Inputs, 1 x Relay Contact set.
EMC Filters to BSEN61800-3 Class A2 (Industrial).
Input Current - 16A.
Input Voltage - 200-240V Single Phase +10%, -15% at 50/60Hz ±2Hz.
Cold Plate mounting in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above - 30mm, Ventilation space below - 50mm, Ventilation space in front - 50mm.
Heat Loss at max output - 90W.
4 x Mountings for M4 bolts at rear.
Full part number is - CFW10 0073 S 2024 EOFACPZ - Sold under other names including Eurotherm Drives (Invensys) as ERCFW10 0073 S 2024 EOFACPZ
Download the WEG CFW-10 Manual from the link below:-