WEG Automation CFW-10 AC Frequency Inverter for 0.37kW (0.5HP) 230V 3 Ph motor in VxF control to 2.6A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
Space-saving "Cold Plate" design. Drive should be mounted on a heat dissipating surface such as a suitable enclosure back plate.
Dimensions: Size 1 95mm Wide x 82mm Deep x 132mm high. IP20.
Overload: 150% x 60 seconds.
Speed Control Range: 0-300Hz.
Braking: None.
Features:- 1 x Analogue Input, 4 Digital Inputs, 1 x Relay Contact set.
EMC Filters: to BSEN61800-3 Class A2 (Industrial).
Input Current: 5.7A.
Input Voltage: 200-240V Single Phase +10%, -15% at 50/60Hz ±2Hz.
Mounting: Cubicle mount onto a suitable Cold Plate or Fin via 4 x Mountings for M4 bolts at rear.
Ambient: Rated at 40C.
Ventilation space above: 30mm
Ventilation space below : 50mm.
Ventilation space in front: 50mm.
Heat Loss at max output: 35W.
Manufacturers part number: CFW10 0026 S 2024 EOFACPZ. Sold under other names including Eurotherm Drives (Invensys) as ERCFW10 0026 S 2024 EOFACPZ
Download the WEG CFW-10 Manual from the link below:-