Parker SSD 650 Series AC Inverter for 2.2kW (3.0HP) 230V 3 Ph motor in VxF control to 9.6A. Converts fixed frequency single phase 230V input (or three phase 230V) to variable frequency three phase 230V for a standard AC Induction motor.
From September 2015 the Parker SSD 650 Series is no longer available. The manufacturer recommends that customers migrate to an AC10 of equivalent rating. If an AC10 is not suitable, a 650G can be used as a direct replacement. See linked products below for both options.
Size 3: 96mm Wide x 200mm Deep x 260mm High. IP20
Weight: 2.7kg.
Overload: 150% x 30 seconds
Speed Control Range: 0-240Hz
Braking: 100% duty into minimum 56 Ohm external resistor.
Includes operator keypad (on controller mounting only).
2 Analogue Inputs, 4 Digital Inputs (2 configurable as Digital Outputs), 1 Analogue Output, 1 Relay Contact set, Motor Thermistor terminals, RJ11 port for RS232 communications.
Single Phase Input Current: 22.0A - Three Phase Input Current : 14.3A.
Input Voltage: 220-240V Single Phase ±10% at 50-60Hz ±10%
EMC Filters: IEC 61800-3 First Environment (Domestic).
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 112W.
Mounting via 35mm DIN rail or 2 x holes for M5 bolts at rear on 242mm centres.
Manufacturer part number is 650-22196030-BF0P00-A1. Legacy part number was 650/022/230/F/00/DISP/UK/0/0. Exactly the same as part number 650/022/230/F/01/DISP/UK/0/0 in all but livery.
This product has been sold under many other names including; Eurotherm Drives, SSD, KIMO, RS Components, Baldor and Newlec.
Download the Parker SSD 650 Quick Start Guide and Manual from the links below:-