IMO SD1 Series AC Inverter for 1.5kW 230V 3ph motor to 7.5A at high overload or when Fan/Pump rated. Operates in VxF or Sensorless Vector and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V to control a standard AC induction motor.
Size 2: 80mm Wide x 141mm Deep x 185mm High. IP20.
Weight: 1.2kg.
Overload: 150% x 60 seconds.(Once every 10 minutes)
Speed Control Range: 0-590Hz.
Braking (DBr): Built-in braking transistor. A 30 Ohm (minimum), 96 Ohm (100% braking torque) external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required.
Includes fixed Operator Keypad with Potentiometer
2 Analogue Inputs, 4 Digital Inputs, 1 Pulse Input, 1 Analogue Output, 1 Digital Output, 1 Relay Output.
Serial Communications: Terminals for Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL2 (EN61800-5-2)
Input Current: 15.6A.
Input Voltage: 220-240V Single Phase -15% +10% at 50-60Hz
EMC Filter: Not Fitted (Unfiltered), external option please see linked product below.
Cubicle mount.
Rated at 40°C ambient.
Ventilation Space: In front: [not specified], above: 100mm, below: 100mm, at sides: 30mm.
Mounting via DIN rail or 4 x 5mm fixings at rear on 175mm x 60mm centres.
Heat Loss: XXXW
Manufacturer part number is SD1-7.5A-21
Replaces: XKL-150-21