Mitsubishi Automation E820 Series AC Frequency Inverter for 1.5kW 230V 3 Ph motor in VxF or Sensorless Vector control to 5A. Converts single phase 230V input to three phase 230V for a standard AC Induction Motor or Permanent Magnet Synchronous Motor.
Size 2b: 128mm High x 108mm Wide x 161mm Deep.
Protection: IP20
1.4kg
Input Voltage: 200-240V single phase -15%, +10% at 50/60Hz +/- 5%.
Input Current: 17.9A Can be improved to 13.9A if an additional DC Choke is fitted.
Output: 8A, 1.5kW at 230V
Overload: 150% for 60 Seconds and 200% for 3 seconds.
Speed Control Range: 0.2 to 590Hz.
Braking (DBr): Fitted with Internal Braking Switch. Fit External Braking resistor if this feature is required. Braking resistor not supplied see linked products below. Minimum Resistor 60 Ohm.
Fixed Keypad with Front Mounted Potentiometer.
2 x Analogue Inputs, 2 Digital Inputs, 1 Analogue Output, 1 Relay Contact set.
Fieldbus: CC-LINK IE, MODBUS TCP, PROFINET.
Programmable from the Keypad, PC via FR-Configurator software, or from the 10 key hand-held parameter unit (see Linked Products below).
Safety Features: Safe Torque Off (STO) up to SIL2/PLd. Links need to be removed and replaced with suitable safety circuit to activate. Dual Channel Input and Monitor Output.
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module.
Cubicle Mount
Ambient Temperature 50°C
Mount via 4 x 5mm holes on 118mm x 96mm centres
Ventilation Space: 100mm above, 100mm below, 10mm at sides and 10mm in front.
Heat Loss at max output: 81W.
Full part number is: FR-E820S-0080EPB-60 (504756).