Mitsubishi Automation E820 Series AC Frequency Inverter for 0.2kW 230V 3 Ph motor in VxF or Sensorless Vector control to 1.5A. Converts single phase 230V input to three phase 230V for a standard AC Induction Motor or Permanent Magnet Synchronous Motor.
Size 1A: 68mm wide x 80.5mm deep x 128mm high
Protection: IP20
0.5kG
Output: 1.4A, 0.2kW at 230V
Overload: 150% for 60 Seconds and 200% for 3 seconds.
Speed Control Range: 0.2 to 400Hz.
Braking (DBr): None.
Fixed Keypad with Front Mounted Potentiometer.
2 x Analogue Inputs, 7 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 2 digital outputs.
Fieldbus: RS485, MODBUS RTU Protocol via PU Connector. For connection details see the communications manual below.
Programmable from the Keypad, PC via FR-Configurator software, or from the 10 key hand-held parameter unit (see Linked Products below).
Safety Features: Safe Torque Off (STO) up to SIL2/PLd. Links need to be removed and replaced with suitable safety circuit to activate. Dual Channel Input and Monitor Output.
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module.
Input Current: 4.1A Can be improved to 2.6A if an additional DC Choke is fitted.
Input Voltage: 200-240V single phase -15%, +10% at 50/60Hz +/- 5%.
Mount via 1 x 5mm hole (top) and 2 x 5mm slots (bottom) on 68mm (H) x 56mm (W) centres
Heat Loss at max output: 17W.
Full part number is: FR-E820S-0015-4-60 (504747). Replaces FR-E720S-015SC-EC. Alternative Part Number: FR-E820S-0.2K-4-60