Invertek Optidrive Eco IP20 series AC Inverter for 0.75kW (1HP) 230V 3 Ph Fan or Centrifugal Pump in VxF or Sensorless Vector control to 4.3A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a standard AC Induction Motor or permanent magnet synchronous motor.
Pump Control Features:-
User configurable pump load monitoring with auto tune function. Adjustable Pump Cleaning Cycle operation. Automatic pump stir function. Control of fixed speed assist pumps via optional cascade control module. Control of Duty, Assist and Standby variable speed pumps via internal Master - Slave network.
Fan & HVAC Control Features:-
Fire Mode: Selectable direction. Selectable speed reference
Broken Belt Detection: Under load monitoring with auto tune configuration.
PID Control: Internal PID control with feedback display.
Size 2: 110mm wide x 185mm deep x 221mm high. IP20.
Weight: 1.8kg.
Overload: 110% x 60 seconds
Speed Control Range: 0-120Hz.
Braking: None.
Integrated OLED Keypad, 3 Digital Inputs, 2 Analogue/Digital Inputs, 2 Digital Outputs, 2 Relay Contact sets, terminals for STO (Safe Torque Off) to SIL2. RJ45 socket for Modbus or BACnet communications over RS485. Other fieldbus options are available – see linked products below.
Input Current: 8.5A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz
EMC Filters: IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 75mm
Ventilation space at sides: 50mm
Mounting via 4 x slotted holes at rear for M5 screws on 63mm x 209mm centres.
Manufacturer part number is ODV-3-220043-1F12-SN. Replaces Optidrive HVAC of equivalent rating.
Made in the UK.
Download the Invertek Optidrive Eco Manual from the link below:-