ABB ACS355 AC Frequency Inverter for 0.37kW (0.5HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 2.4A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
No Keypad included.
Dimensions: Size R0, 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate).
Enclosure Rating: IP20.
Weight: 1.2kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-599Hz.
Braking at full load for 90 seconds every 120 seconds to 70 Ohm minimum, 390 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply for common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: 6.1A, or 4.5A when supplied via an 8mH choke.
Input Voltage: 200V-240V Single Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Cubicle Mounting: onto symmetrical DIN rail, or via 4 x 5mm diameter holes at rear on 50mm x 191mm centres, or 3 x 5mm diameter holes at the side on 41 x 191mm centres.
Wall Mounting: in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40°C.
Ventilation Space: 75mm above and below, 0mm at sides (drives can be mounted side by side)
Heat Loss: 47.7W at maximum output
Part Number: ACS355-01E-02A4-2 (3AUA0000058166) and is a direct replacement for ACS350-01E-02A4-2
Download the ABB ACS355 Manual from the link below:-