TECDrive E3 IP66 series AC Inverter for 0.37kW (0.5HP) 230V three phase motor in VxF control to 2.3A. Converts fixed frequency single phase 110V input to variable frequency 230V to control the speed of a standard AC Induction Motor.
Size 1: 161mm Wide x 179mm Deep x 232mm High. IP66 (Nema 4X) dust tight and resistant to water spray - indoor use only.
Weight: 3.1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: No dynamic braking.
Integrated operator keypad with 6-digit LED display, 2 Analogue/Digital Inputs, 2 Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU communications over RS485 or PC Connection to OptiTools Studio software.
Input Current: 11A
Input Voltage: 110-115V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters.
Wall mount.
Rated 40° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x holes for M4 bolts at rear on 148.5mm x 189mm centres.
Manufacturer part number is TEC-3-110023-101X.
Made in the UK.
Download the TECDrive Manual from the link below:-