Hollow Shaft Programmable Optical Encoder at TTL or HTL level for Feedback to closed loop AC Flux Vector drives.
PPR: 1024ppr default, programable for 1 to 65,536 pulses per revolution.
Signals: TTL/RS422, A+, B+, R+, A-, B-, R- (Vout = 5 VDC Default), or programmable as HTL/push-pull 6 channel (Vout = Vin).
Supply: 4.75V to 30V DC.
Consumption: 70mA without load.
Maximum Speed: 3000RPM.
Pulse Frequency: 300kHz maximum at TTL level, or 160kHz at HTL.
Programmable Parameters:-
Output level TTL/HTL.
Pulse number 1...65536.
Zero pulse width 90°/180°.
Zero pulse position.
Signal sequence.
Encoder format can be changed using handheld programmer or via PC. Please see programming tools below
Approvals: UL 508 / CSA 22.2.
Dimensions: 58mm diameter excluding the radial connector.
Weight: 300g
Mounting: via through hollow shaft onto 15mm diameter (Max) motor shaft. Hollow shaft can be reduced to suit various motor sizes, shaft reducers given below.
Protection Rating: IP67.
Connection: 8 pin M12 connector. Male, Radial. (See suitable encoder cable below)
Customs code: 8503009999
Part number: EIL580P-TT157FB01024B
Download the drawing and data sheet from the links below...