Control Station supplied with Forward pushbutton, Stop Pushbutton, Reverse Switch and Potentiometer. Pushbuttons, Switch and Potentiometer are supplied as loose items, assembly is required.
Control Station Size: 183mm W x 79mm H x 58mm D. IP66.
Fixing: 4 x M4.5mm holes on 170mm W x 67mm D centres
Overall Depth increases by 30mm with the control gear fitted.
Control Station Material: Plastic
List of items supplied:
1 x WEG PBW-4 Grey Control Station (32132) and 1 x M20 Cable Gland
1 x WEG Green Momentary Forward Pushbutton (29992) and 1 x Normally Open Contact Block (30363)
1 x WEG Red Momentary Stop Pushbutton (29989) and 1 x Normally Closed Contact Block (30362)
1 x WEG Selector Switch Knob with 2 Fixed Positions (31557) and 1 x Normally Open Contact Block (30363)
1 x IDS Single Turn 10k Potentiometer (31252)
1 x Pack of legends for Control Station.
1 x 3m Control Cable. 0.5mm, 12 core, unscreened
Contact Blocks attach to the rear half of the control station
Contact Blocks are required to be fitted directly behind the pushbuttons for operation.
This product is supplied as individual loose items as listed above. No wiring instructions are provided as this varies between AC Inverters. Please refer to the AC Inverter manual for full details.
When used with an AC Inverter the AC Inverter should be configured for 3-wire momentary control with a speed potentiometer, if this meets the safety requirements of your application.
For AC Inverters that use 3-wire control using Start and stop pushbuttons with a reverse selector switch and a 10k potentiometer - Check digital input configuration is suitable for selected AC Inverter.
Order Code: IDS-Pendant-P43