Spare Centrifugal Fan 230V suitable for Parker 590H

Spare fan suitable for Parker 590H and 591H Dc Drive range (noting specification change)
Backward curved centrifugal fan
230V 50/60Hz @ 0.6A (Cap 6.0µF)
Max. Airflow : 1415 m³/h. at Minimum Pressure 50Hz (832 CFM -4°F /158°F)
RPM 2775
Noise 73dBA
Ambient -20°C / +70°C

The Ecofit V09-23 no longer available.
Parker Ref DL466242 (2RRE45 250x56R ) 110V Roof Fan for the Parker 590H series

Closest know replacement L47-A3 p, slight dimensional difference and has a 100 m³/h less maximum air volume.

Dimensions 252mm Overall diameter, 102mm deep
Mounted on 4 x M4 x 5 holes @ 58mmPCD
Weight 3.2kg

Care with respect to drive air supply flow, ambient, mounting clearances (Should be maintained as per original fan with additional spacers 'not supplied)and ambient

Note:

This is also a 230V fan so retrofitting required fan wiring alteration.
Possible addition of a auxiliary transformer and fusing to supply 230V linked below
Consider Drives that are run near or close to full capacity
Where possible increase inlet filters (ensure these are maintained) and add fans or inlets, reduce input air ambient.

Manufacturers part number: 2 RRE 45 250x50R 230/1/50/60 CDIM=102