Fairford Electronics XFE100 Series Digital Soft Start for a 230/400V 3 Ph motor up to 5.5kW (7.5hp) continuous at 13A, subject to application.
From January 2016 the Fairford XFE and QFE series are no longer available and have been replaced by the Synergy series. The manufacturer will continue to support the XFE and QFE until 2021.
Rated to suit motors and Trip Class Ratings:-
5.5kW, 13A at 400V – Trip Class 10B and 10 (Continuous)
5.5kW, 10A at 400V – Trip Class 20 (Continuous)
3kW, 9A at 400V – Trip Class 30 (Continuous)
(see Trip Class Guide below for definitions)
Size 1: 222mm Wide x 195mm Deep x 420mm High. IP20.
Weight: 7.3kg.
Features include:
Integral keypad
Start Time: 1-255s
Stop Time: 0-255s
Overcurrent Protection (does not replace full thermal overload protection).
Energy Optimising: In certain load conditions the XFE can reduce energy costs by reducing power required by the load, without loss of performance.
Input Voltage: 230-460V, 400-575V or 500-690V AC Three Phase -15% +10% at 50-60Hz ± 2Hz
Requires Single Phase 115V or 230V AC rms (-15% +10%) supply for the internal control circuitry.
Wall mount in clean environment or cubicle mount.
Ventilation space above and below: 75mm
Ventilation space at sides: 15mm
Ventilation space in front: 25mm
Mounting via 4 x M6 bolts at rear on 125mm x 380mm centres.
Rated at 40C Ambient.
Full part number is XFE-108K (XFE108K)
Download the Fairford XFE Manual from the link below:-