TEC - 110V Single Phase Motor 1.5kW (2HP) Cap Start 2P 90F Foot/Flange

TEC 90S Frame - 1.5kW (2HP) 110V Single Phase High Starting Torque (Capacitor Start/Capacitor Run) 2 Pole Flange Mounting AC Motor for use at fixed Speed.

Use with a fixed frequency 1ph input at 110V x 50Hz for 1.5kW x 2800RPM output.

High starting torque at 140%.
Full Load Current - xxA.
Starting Current is xxx%.

Mounting is B35 Foot and Flange Mounting.
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from shaft shoulder.
Flange mount on 4 x 12mm holes at 165mm PCD with 130mm diameter spigot in the 200mm diameter flange.
Shaft is 24mm dia x 50mm long with 8mm keyway.
Weight is 13kg

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Full part number is - 1.521TCC B35 110V

Download the motor dimensioned drawing and full technical catalogue from the links below...