Three Phase Output Sine Filter for 7.5kW Inverter Drives to 16A .
Use this as an output choke for long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
This product is used to reduce peak Voltages applied at the motor for old or vulnerable motors and very long cable runs.
Rating: 16A maximum continuous.
Inductance: 3.4mH
Capacitance: 1.5µF
Losses: 167W.
Overload: 150% for 60 seconds every hour.
Voltage: 500V Three phase.
Switching Frequency: 3kHz to 8kHz (4kHz is recommended).
Weight: 7.8kg.
Dimensions: 190mm x 82mm x 235mm high (Image 2).
Mounting: 8x12mm slots on 170mm x 58mm centres.
Terminals: Clamps for 10mm².
Enclosure Rating: IP00
Manufacturer: REO.
Part Number: N-CNW933/16. Article No 201110933024900.
The three main reasons to use this product are...
1) Output choke/sine wave filter for cleaning up the sine wave and reducing common mode noise.
2) It also allows the installation of long cable runs, up to 600m. Cable run is the accumulated actual cable length, connected to the Inverter output terminals feeding single or multiple motors.
3) This product reduces peak Voltages applied at the motor for old or vulnerable motors.
Download the dimension drawing from the link below...