WEG W22 Cast Iron Premium Efficiency (IE3) 5.5kW 6 Pole 3 phase 6 leads V6T WFF2 AC Motor.
132 Frame, V6T Vertiacl shaft Mount Foot with top mounted terminal box.
***Special purchase motor cannot be cancelled or retruned once ordered if incorrect, please check the specification before purchase****
Power: 5.5kW at 400V or 690V 50Hz.
Speed: 970rpm at 50Hz.
Torque: 54.1 Nm at 50Hz.
6 wire configuration
Full Load Current with links in DELTA (415V 3ph): 12.4A
Full Load Current with links in STAR (690V 3ph): 7.48A.
Power Factor: 0.7 when mains connected at 50Hz.
Efficiency: 88% (IE3) at 50Hz
Starting Method: DOL.
For use with Variable Frequency Drives or a fixed frequency 400V three phase mains supply at 50Hz.
AC Inverter Maximum Speed: 90Hz, 1746rpm. Reduced Torque rating from 50Hz to 90Hz.
AC Inverter Minimum Speed: 5Hz, 97rpm. Reduced Torque rating from 25Hz to 5Hz if continually operated in this speed range.
Performance details of the motor with an AC Inverter are given in the datasheet below.
Set terminal box links 'three a-breast' for 400V 'Delta' connection. Delta connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply.
Set terminal box links ‘two at one side’ for 690V 'Star' connection.
● Optional Feature
★ Special Feature
Painting Plan 207A (C3 according to ISO 12944)
Finish Color: RAL 5009
With Grease Nipples (D.E and N.D.E.) ●
With Bearing Cap ●
Grease: Krytox GPL 225 ★
Aluminium Fan ●
Fan Cover Material: Cast Iron ●
With Terminal Block - 6 Pins
Sealing: V-Ring
Certification: CSA SAF/UL SAFE/CE/EAC/UKCA/EV
Balancing: Normal with 1/2 Key
Single grounding
IP55 TEFC (Totally Enclosed Fan Cooled) IC411. (Fan will rotate the same speed as the motor shaft)
272mm Wide x 495mm Long x 351mm High. (Overall dimensions including shaft)
V6 Vertical mount on 12mm holes with 216mm wide x 178mm centres 89mm back from shaft shoulder.
Shaft: 38mm diameter x 80mm long.10mm x 63mm key
Motor Housing: Cast Iron.
Weight: 86.2kg.
Rated at 40C Ambient. (Ventilation space required for air intake)
Thermistors: Not Fitted
Bearings: Ball Bearings. Type: 6308 C3 (Drive End). 6207 C3 (NDE)
Lubricant: KRYTOX GPL 225
Part number: 1846789608
Drawing and data sheet downloads:
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.