WEG W22 IE3 Cast Iron 55kW Three Phase Motor 400V/690V 4 Pole 250S/M Frame B3

WEG W22 Cast Iron Premium Efficiency (IE3) 55kW 4 Pole 3 phase AC Motor.
250 Frame, B3 Foot Mount with top mounted terminal box.

Power: 55kW at 400V or 690V 50Hz.
Speed: 1480rpm at 50Hz.
Torque: 355Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 98.6A
Full Load Current with links in STAR (690V 3ph): 57.2A.
Power Factor: 0.85 when mains connected at 50Hz.
Efficiency: 94.7 % (IE3) at 50Hz.

For use with Variable Frequency Drives or a fixed frequency 400V three phase mains supply at 50Hz.
AC Inverter Maximum Speed: 90Hz, 2664rpm. Reduced Torque rating from 50Hz to 90Hz. 
AC Inverter Minimum Speed: 5Hz, 148rpm. Reduced Torque rating from 25Hz to 5Hz if continually operated in this speed range.
Performance details of the motor with an AC Inverter are given in the datasheet below.
Set terminal box links 'three a-breast' for 400V 'Delta' connection. DELTA connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply.
Set terminal box links ‘two at one side’ for 690V 'Star' connection.

IP55 TEFC (Totally Enclosed Fan Cooled) IC411. (Fan will rotate the same speed as the motor shaft)
506mm Wide x 965mm Long x 648mm High. (Overall dimensions including shaft and terminal box)
Foot mount on 24mm holes with 406mm wide x 311/349mm centres 168mm back from shaft shoulder.
Shaft: 65mm diameter x 140mm long.
Motor Housing: Cast Iron.
Weight: 489kg.

Rated at 40C Ambient. (Ventilation space required for air intake)
Thermistors: 1 fitted per phase
Bearings: Ball Bearings. Type: 6314 C3 (Drive End) 6314 C3 (NDE)

Part number: 12863073

Drawing and data sheet downloads: