Marelli - IE2 0.75kW (1HP) 4 Pole 230V/400V 3ph B14 Face Mount AC Motor - MAQ80MB4

MAQ80MB4 B14

Order Code: 25418
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: Marelli, Range: MAQ Three Phase IE2 Aluminium

Marelli - High Efficiency 80 Frame 0.75kW 3ph 4 Pole Face Mounting AC Motor for 230V or 400V x 50Hz 3 phase supply.  Use with any Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.

Fixed mains supply output:  0.75kW (1HP) x 1430RPM at 230V or 400V x 50Hz 3ph
Inverter supply output: 15:1 Speed Control range from 143RPM to 2145RPM for 5Hz to 75Hz, with suitable de-rating at the lower speeds.

Full Load Current - 3.1A at 230V, or 1.8A at 400V.
Power Factor is 0.76 when mains connected at 50Hz.
Efficiency is 79.8% at full load, 79.6% at 75% load and 76.3% at half load.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M20 Gland.

158mm Wide x 290mm Long x 220mm high overall in its IP55 enclosure.
Face mount (B14) on M6 tapped holes at 100mm pcd with 80mm dia register in the 120mm diameter flange.
Shaft is 19mm dia x 40mm with 6mm wide key.
Weight is 11.4kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.

Part number is - MAQ80MB4 B14

For Variable Speed use:-
Part Time Output when Inverter powered is...
2.5Nm - 0.75kW (1HP) x 2860RPM at 100Hz
5.01Nm - 0.75kW (1HP) x 1430RPM at 50Hz
5.01Nm - 0.375kW (0.5HP) x 715RPM at 25Hz
5.01Nm - 0.075kW (0.1HP) x 143RPM at 5Hz

Continuous Output when Inverter powered is...
3.34Nm - 0.75kW (1HP) x 2145RPM at 75Hz
5.01Nm - 0.75kW (1HP) x 1430RPM at 50Hz
4.26Nm - 0.32kW (0.43HP) x 715RPM at 25Hz
2.5Nm - 0.038kW (0.05HP) x 143RPM at 5Hz

Download the Dimensions and High Efficiency MAQ Motor Technical Catalogue from the link below...

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of WEG RW27D-1 1.8-2.8A Thermal Overload Relay for CWM Contactors

WEG RW27D-1 1.8-2.8A Thermal Overload Relay for CWM Contactors

RW27-1D3-D028

(10452548)

Order code: 22596

10+ in stock

£19.65
£19.19
£18.74
1+
5+
10+
Photo of Bosch Rexroth EFC3600 0.75kW 400V 3ph AC Inverter Drive, C3 EMC

Bosch Rexroth EFC3600 0.75kW 400V 3ph AC Inverter Drive, C3 EMC

EFC3600-0K75-3P4-MDA-7P-NNNN

(R912003763)

Order code: 24089

Obsolete Product, a replacement may be available

 
 
Photo of Invertek Optidrive E2 IP66 0.75kW 400V 3ph AC Inverter Drive, SW, C2 EMC

Invertek Optidrive E2 IP66 0.75kW 400V 3ph AC Inverter Drive, SW, C2 EMC

ODE-2-14075-3KA1Y

Order code: 21424

Obsolete Product, a replacement may be available

 
 
Photo of Invertek PCE - 0.75kW 230V 1ph to 3ph Motor Mounting AC Inverter

Invertek PCE - 0.75kW 230V 1ph to 3ph Motor Mounting AC Inverter

OPC-1-12075-1KB1N

Order code: 23117

Obsolete Product, a replacement may be available